skip to Main Content

Electrical CPT (U)

Advanced measuring method for Cone Penetration Testing


Electrical CPT(U) probes, whether in compression or subtraction design, are the most advanced measuring method for Cone Penetration Testing.

High quality load cells and high precision calibration at Geomil ensure all electrical cones comply to EN ISO 22476‐1 standards.

Standard measuring ranges are 100 or 50 MPa for qc and 1 or 0.5 MPa for fs. Other ranges or combinations can be realised within the physical limitations of the desired cone type and size. The load cell signals are amplified and transmitted up‐hole as a voltage signal via cable and converted to a 16 bit digital signal in the GME 500 data acquisition system.

Calibration data can be printed and stored on a USB memory stick.

Download the leaflet


Back To Top