CPT trucks provide the most convinient and flexible solution for performing CPT soundings in a laboratory like environment.

For downloading the data sheet containing information about the GeoMil CPT trucks please click the image.

For rough terrains and soft ground conditions there is no better solution than a cabin crawler to perform safe and economic CPT soundings.

For downloading the data sheet containing information about the GeoMil CPT cabin crawler please click the image.

The new GeoMil 200kN high capacity static push tower with protected pistons as well as the new tube rack designs allow for easy handling and help avoiding professional deseases.

For new trucks and crawlers its standard but also old units can be upgraded!

For downloading the data sheet containing information about the new 200 kN pusher and tube racks please click the image.

The Light Weight Crawler is the latest design of GeoMil Equipment. It comprises a modern Hinowa undercarriage with shiftable tracks, a 2 Cyl. silent Hatz Diesel engine and high quality hydraulic valves. The newly designed and synchronised anchoring gear guarantees for quick and easy driving and releasing the anchors. The rig can be anchored in a straight alignment parallel to the long axis or conventionally at the sides of the rig. The 100kN hydraulic pusher is mounted parallel to the long axis of the rig, a rotatable tube rack allows for comfortable operation.

For downloading the data sheet containing information about the GeoMil Light Weight Crawler please click the image.

The new GeoMil Trailer Mounted Penetrometer 200 kN/TR forms a complete make-over and now two in one unit. It combines the functionality of an easy to haul trailer unit with working platform and, since all components can be detached, stand alone penetrometer pusher for special operation deployment.




For downloading the data sheet containing information about the GeoMil 200kN/TR please click the image.

The versatile 200 kN Stand Alone Penetrometer allows for flexible and efficient deployment. It can be mounted on various platforms providing sufficient reaction forces or it can be anchored to the ground. Its an ideal working tool for near shore CPT's carried out form a jack-up or barge.


For downloading the data sheet containing information about the GeoMil 200kN stand alone penetromter please click the image.

For CPT soundings in areas with limited access, restricted head clearance or when the complete penetrometer has to be hand carried, GeoMil now provides the solution: The MPP 150©, a small but powerful twin ram 150 kN portable penetrometer system.



For downloading the data sheet containing information about the GeoMil 150 MPP please click the image.

The GeoMil 100kN stand alone penetrometer forms since long an easy to use, long lasting and versatile pushing unit for CPT operations.

The twin ram construction allows for using advanced pushing and pulling devices and the push-/pull bridge is designed for deploying various measuring devices and clamps for electrical as well as mechanical CPT.



For downloading the data sheet containing information about the GeoMil 100kN stand alone penetromter please click the image.

The newly developed 50 kN Stand Alone Penetrometer now comes with a twin ram hydraulic pusher with 70cm stroke. Mechanical CPT's have to be carried out with 0.5m tubes while electrical CPT's allow for 1m tubes.

Coming with a small wheel set the pusher can be manoevered easily. All components can also be hand carried so that CPT soundings in areas difficult to access are also possible.

High precision CPT soundings require state of the art load sensors and strain gages. The GeoMil cones provide electrical CPTu cones with analogue or digital signals and compression or subtraction cone design

For downloading the data sheet containing information about the GeoMil electrical CPT systems please click the image.

The mechanical cones like friction or friction jacket (Begeman) cones still form a robuts alternative to electrical cones. In soils where gravel, boulders or other obstacles could damage the sensitive electrical cones or when the total friction has to be determined mechanical CPT is common.

For downloading the data sheet containing information about the GeoMil mechanical CPT varieties please click the image.

Newly designed high precision and PLC controlled vane tester providing flexible measuring constraints and easy to use automatic logging based on Excel XP.

For downloading the data sheet containing information about the GeoMil probe range please click the image.

GeoMil Equipment B.V. supplies a complete range of probes for environmental, geological and geophysical soil investigation.

For downloading the data sheet containing information about the GeoMil probe range please click the image.

GeoMil Equipment B.V. supplies a complete range of probes for environmental, geological and geophysical soil investigation.

For downloading the data sheet containing information about the seismic probe adapter for CPT cones please click the image.

High precision CPT soundings require state of the art load sensors and starin gages. The GeoMil and Geotech cones provide electrical CPTu cones with analogue or digital signals, cable or cordless data transmission and compression or subtraction cone design

For downloading the data sheet containing information about the GeoMil GME 500 please click the image.

With CPTest^© GeoMil provides a versatile and easy to use acquisition software for mechanical as well as electrical Cone Penetration Tests (CPT).
The program has been designed as 32 bit application suitable for Microsoft Windows (95 and higher) operation systems. CPTest^© processes and presents CPT data gained with GeoMil's GME 500 series of data acquisition systems, both the 19" industrial built-in and portable IP65 version.

For downloading the data sheet providing information about CPTest^© please click the image.

The presentation, plotting and interpretation functions allow for professional and productive data processing.





For downloading the data sheet providing information about CPTask^© please click the image.

SC(1-15)-DAC is a highly configurable data acquisition software package which communicates with the BCE SCPT signal conditioning board and a notebook based PCMCIA A/D card. The SCPT systems can be expanded up to 15 channels (30 channels if two A/D board are used), but typically uniaxial (SC1-DAC), biaxial (SC2-DAC), triaxial (SC3-DAA), and true interval six channel systems (SC6-DAA) are assembled.

More information is available at Baziw Consulting Engineers

SC(1-15)-RAV general comes in the uniaxial (SC1-RAV) and triaxial (SC3-RAV) versions. SC3-RAV can be used to process any data acquired with triaxial configured probes (eg., SC6-DAC). It is also possible to obtain a biaxial analysis package (SC2-RAV). The SC(1-15)-RAV software packages allow the investigator to process and visualize the acquired seismic cone data so that interval velocities and attenuation values are obtained. SC(1-15)-RAV provides graphical analysis interface so that the user can review frequency spectra to identify dominant responses. The user then specifies the necessary cascadable low pass, high pass, notch, and bandpass zero phase shift digital filters to implement on the data so that the desired event (P-wave or S-wave) is isolated. In SC(1-15)-RAV interval velocities are obtained by implementing a patented optimized cross correlation algorithm. In addition, the standard reverse polarity technique can be used. Seismic data can also be processed in Batch mode and with the FMDSM technique. Once the data has been processed, the user can graphically display the derived interval velocities.

More information is available at Baziw Consulting Engineers

Efficient, reliable and safe CPT soundings require not only most accurate probes and acquisition systems but also high quality tubes, casing and further accessories.
In order to achieve the best possible performance of CPT sounding GeoMil Equipment B.V. manufacturers and supplies a large variety of high quality sounding tubes, casing tubes, inner rods, friction reducers and adapters.

For downloading the data sheet containing information about the GeoMil tubes please click the image.

Pushing forces of up to 200kN and pulling forces of up to 260kN need to transmitted efficiently from the rams to the sounding string.
Have a look at the superb GeoMil clamps providing slip-free performance and minimum wear of the tubes.

For downloading the data sheet containing information about the GeoMil tubes and clamps please click the image.

GeoMil Equipment B.V. supplies a complete range of soil and fluid samplers that can be used in combination with standard penetrometer pusher rigs.

For downloading the data sheet containing information about the GeoMil soil and fluid samplers please click the image.

The CTU-200 cone testing unit enables the CPT operator to check the electric CPT cones on site.
The unit is a modern, versatile and easy to use piece of equipment for testing the cone resistance (q_c) and the local sleeve friction (f_s). It can be used as a stand-alone unit or in combination with a GME-400 or GME-500 data acquisition system.

For downloading the data sheet containing information about the GeoMil Cone Testing Unit please click the image.